ELIET SUPER Prof Chipper / Shredder

From:£13,127.64£15,753.17 inc. vat

In Stock
Highlights:
  • 6 Options Available
  • Standard Super Prof
  • Super Prof Max
  • Wheeled and Road Options
  • Tracked Options
  • 437kg – 506kg
Clear
SKU: MA029 050 113 Categories: ,
Description

BLOW CHUTE

The Super Prof blow chute is a fine example of engineering. Its shape prevents turbulence and the design of the curve was based on the optimal trajectory of the flying chips. As a result the machine has phenomenal propelling capacity. The choice for synthetics as the material for the blow chute was a very deliberate one: it is seamless, corrosion resistant, perfectly smooth and sound absorbing. Its low air resistance makes the chute less inclined to clog. The blow chute has a discharge height of 2m – 8ft and a rotation span of 300°.

COLLAPSIBLE BLOW CHUTE

The blow-out level of the Super Prof is at 2 m – 8 ft. An important asset, as it allows you to blow the chips from any possible location to where you want to deposit them. To make sure that the height does not pose a problem for transport, the chute can be collapsed onto the machine and clamped in place. Its height is thus reduced to 1.45 m – 4.75 ft.

CATERPILLAR TRACKS

Caterpillar tracks prove highly effective on hilly countryside with plenty of slopes. Despite the impressive set of tracks, the weight of the Cross Country is still quite limited. As a result the ground pressure is very
low , which means that the caterpillar tracked shredder can also be used on a lawn without any risk of doing damage. Operating the track drive is just as simple as the wheel based Super Prof. The only difference is that on the Cross Country, two handles on the handlebar allow for individual control of each track separate caterpillar. Making the track rotate in opposite directions will turn the machine around its axis. This high manoeuvrability offers the opportunity to get into hard-to-reach places and simultaneously yields enormous time savings.

INFEED OPENING

The feed opening was made wide on purpose, but without compromising on the machine’s compactness. The feed hopper has become considerably larger mainly at the top. This makes for a larger feeding plateau, allowing the operator to place the green waste quicker and have both hands free to manipulate the waste. The special shape of the hopper walls pushes the waste towards the 45 cm wide central bottom of the hopper. This flat bottom does not get any narrower towards the feed roller. The feed roller can lift up to 13 cm, which creates a huge infeed opening. This feature is highly appreciated by professionals when they are feeding branches with many twigs or voluminous cutting waste.

INTELLIGENT MACHINE

All the features of the machine are grouped in a well-organised dashboard at the front of the machine. The large LCD screen stands out at the centre between the ignition key and the choke valve. It is via the LCD screen that the Super Prof communicates with its operator. Besides showing useful machine features, it tells the operator when maintenance is due. Below the display is the machine’s most essential button: the ‘ACTION’ button. This electronic control of the electromagnetic coupling engages the blade system and the Axelero™ and ensures that the feed roller can be activated. At one push of the button, the shredder beast comes to life.

EASY FEEDING

To ensure simple and intuitive control, the operating mechanism of the feed roller was separated clearly and visually. Push buttons within reach allow for selecting feed/reverse feed. Integrated LED lights in the button highlight the selection. One push of the emergency stop handle or one of the buttons will neutralise the selection and immediately stop the feed roller. This ultimate operating simplicity is a guaranteed time saver.

MAXIMUM FLEXIBILITY AND TIME SAVINGS

The machine shreds wood as well as large volumes of green waste. The material does not have to be sorted beforehand. You drive the self-driving shredder to the location where you want to perform the shredding, which means that you don’t lose any time supplying or removing materials.

MINIMUM MANAGEMENT COSTS

The machine was developed from a low-maintenance perspective, so that checks and maintenance don’t become time-consuming and dreaded activities. The Super Prof’s internal management system helps to comply with the schedule. Regular maintenance keeps high repair costs at bay. The blade system is insensitive to foreign objects and its maintenance is simple and self-manageable. Only a limited number of parts are subject to wear and in addition, the machine has a high resale value as a second-hand item, which is an added bonus for its ROI.

MAXIMUM YIELD

The Eliet patented shredding system uses the weakness of the wood and therefore requires little motor capacity. The compact machine with its broad feeder also allows shredding branches of up to 13 cm thick as bundles of voluminous waste. Cutting waste does not have to be sorted prior to shredding. Branches don’t require cutting before processing them in the machine. It all makes for gigantic time-savings.

The ABM system ensures that the engine always operates at maximum capacity and that fuel consumption never exceeds 3 litres per hour. The optional ECOEYE™ system lowers fuel consumption in passive operation mode, yielding another considerable saving. And finally the machine lowers your company’s ecological footprint.

Additional information
Weight N/A
Machine Power Type

Petrol

Which brand to view

Eliet

Machine Category

Shredder / Chipper

Machine Class

Professional

Options

Super Prof On Wheels, Super Prof Cross Country, Super Prof On Road, Super Prof MAX On Wheels, Super Prof MAX Cross Country, Super Prof MAX On Road

On Wheels

On Wheels

The new Super Prof marks the start of a whole new generation of Super Prof Eliet shredders. While keeping its original DNA, the new machine is more comfortable, more efficient and more environmentally friendly; it has added robustness and is smarter, safer and easier to maintain. The new Super Prof is made especially for you, for your future, your comfort, your profit and for the preservation of nature.

 

BLOW CHUTE

The Super Prof blow chute is a fine example of engineering. Its shape prevents turbulence and the design of the curve was based on the optimal trajectory of the flying chips. As a result the machine has phenomenal propelling capacity. The choice for synthetics as the material for the blow chute was a very deliberate one: it is seamless, corrosion resistant, perfectly smooth and sound absorbing. Its low air resistance makes the chute less inclined to clog. The blow chute has a discharge height of 2 m – 8ft and a rotation span of 300°.

COLLAPSIBLE BLOW CHUTE

The blow-out level of the Super Prof is at 2 m – 8 ft. An important asset, as it allows you to blow the chips from any possible location to where you want to deposit them. To make sure that the height does not pose a problem for transport, the chute can be collapsed onto the machine and clamped in place. Its height is thus reduced to 1.45 m – 4.75 ft.

WHEEL DRIVE – SD

The wheels of the new Super Prof were equipped with a powerful wheel motor. The speed forward or in reverse is controlled with a simple movement from the pulse via a rotating handle on the handlebar. The more the handle is rotated forwards or backwards, the faster the machine moves in that direction. The wheel drive is so powerful that it takes only one man to load or unload the machine from a van or a trailer.

INFEED OPENING

The feed opening was made wide on purpose, but without compromising on the machine’s compactness. The feed hopper has become considerably larger mainly at the top. This makes for a larger feeding plateau, allowing the operator to place the green waste quicker and have both hands free to manipulate the waste. The special shape of the hopper walls pushes the waste towards the 45 cm wide central bottom of the hopper. This flat bottom does not get any narrower towards the feed roller. The feed roller can lift up to 13 cm, which creates a huge infeed opening. This feature is highly appreciated by professionals when they are feeding branches with many twigs or voluminous cutting waste.

INTELLIGENT MACHINE

All the features of the machine are grouped in a well-organised dashboard at the front of the machine. The large LCD screen stands out at the centre between the ignition key and the choke valve. It is via the LCD screen that the Super Prof communicates with its operator. Besides showing useful machine features, it tells the operator when maintenance is due. Below the display is the machine’s most essential button: the ‘ACTION’ button. This electronic control of the electromagnetic coupling engages the blade system and the Axelero™ and ensures that the feed roller can be activated. At one push of the button, the shredder beast comes to life.

EASY FEEDING

To ensure simple and intuitive control, the operating mechanism of the feed roller was separated clearly and visually. Push buttons within reach allow for selecting feed/reverse feed. Integrated LED lights in the button highlight the selection. One push of the emergency stop handle or one of the buttons will neutralise the selection and immediately stop the feed roller. This ultimate operating simplicity is a guaranteed time saver.

MINIMUM MANAGEMENT COSTS

The machine was developed from a low-maintenance perspective, so that checks and maintenance don’t become time-consuming and dreaded activities. The Super Prof’s internal management system helps to comply with the schedule. Regular maintenance keeps high repair costs at bay. The blade system is insensitive to foreign objects and its maintenance is simple and self-manageable. Only a limited number of parts are subject to wear and in addition, the machine has a high resale value as a second-hand item, which is an added bonus for its ROI.

MAXIMUM FLEXIBILITY AND TIME SAVINGS

The machine shreds wood as well as large volumes of green waste. The material does not have to be sorted beforehand. You drive the self-driving shredder to the location where you want to perform the shredding, which means that you don’t lose any time supplying or removing materials.

MAXIMUM YIELD

The Eliet patented shredding system uses the weakness of the wood and therefore requires little motor capacity. The compact machine with its broad feeder also allows shredding branches of up to 13 cm thick as bundles of voluminous waste. Cutting waste does not have to be sorted prior to shredding. Branches don’t require cutting before processing them in the machine. It all makes for gigantic time-savings.

The ABM system ensures that the engine always operates at maximum capacity and that fuel consumption never exceeds 3 litres per hour. The optional ECOEYE™ system lowers fuel consumption in passive operation mode, yielding another considerable saving. And finally the machine lowers your company’s ecological footprint.

On Road

On Road

Although the concept of a self-propelling shredder, which allows you to get to the back of the garden and process the cutting waste on site, offers an ideal solution for many garden contractors, for another large group of gardeners this added flexibility does not imply added value because they have a different work area. Especially for this group, Eliet recently developed a Super Prof on a chassis for fast transportation purposes.

 

BLOW CHUTE

The Super Prof blow chute is a fine example of engineering. Its shape prevents turbulence and the design of the curve was based on the optimal trajectory of the fl ying chips. As a result the machine
has phenomenal propelling capacity. The choice for synthetics as the material for the blow chute was a very deliberate one: it is seamless, corrosion resistant, perfectly smooth and sound absorbing. Its low air resistance makes the chute less inclined to clog. The blow chute has a discharge height of 2 m – 8ft and a rotation span of 300°.

COLLAPSIBLE BLOW CHUTE

The blow-out level of the Super Prof is at 2 m – 8 ft. An important asset, as it allows you to blow the chips from any possible location to where you want to deposit them. To make sure that the height does not pose a problem for transport, the chute can be collapsed onto the machine and clamped in place. Its height is thus reduced to 1.45 m – 4.75 ft.

TRAILER

Here, the shredder is fixed onto a galvanized and spring loaded trailer. Other than that, the Super Prof ON ROAD has the same properties and features as the selfdriving model. The trailer does not add any disadvantages in terms of maintenance either. The total weight of the trailer is only 495 kg (1091 lbs.) and therefore does not pose any special requirements for the towing vehicle. A nyone possessing a car driver’s licence can transport the machine. Once detached from the vehicle, the shredder’s excellent weight distribution makes it easily movable by hand also. The trailer is approved for traffi c and equipped with all the required features in terms of lights, draw bar, etc.

INFEED OPENING

The feed opening was made wide on purpose, but without compromising on the machine’s compactness. The feed hopper has become considerably larger mainly at the top. This makes for a larger feeding plateau, allowing the operator to place the green waste quicker and have both hands free to manipulate the waste. The special shape of the hopper walls pushes the waste towards the 45 cm wide central bottom of the hopper. This flat bottom does not get any narrower towards the feed roller. The feed roller can lift up to 13 cm, which creates a huge infeed opening. This feature is highly appreciated by professionals when they are feeding branches with many twigs or voluminous cutting waste.

INTELLIGENT MACHINE

All the features of the machine are grouped in a well-organised dashboard at the front of the machine. The large LCD screen stands out at the centre between the ignition key and the choke valve. It is via the LCD screen that the Super Prof communicates with its operator. Besides showing useful machine features, it tells the operator when maintenance is due. Below the display is the machine’s most essential button: the ‘ACTION’ button. This electronic control of the electromagnetic coupling engages the blade system and the Axelero™ and ensures that the feed roller can be activated. At one push of the button, the shredder beast comes to life.

EASY FEEDING

To ensure simple and intuitive control, the operating mechanism of the feed roller was separated clearly and visually. Push buttons within reach allow for selecting feed/reverse feed. Integrated LED lights in the button highlight the selection. One push of the emergency stop handle or one of the buttons will neutralise the selection and immediately stop the feed roller. This ultimate operating simplicity is a guaranteed time saver.

MAXIMUM FLEXIBILITY AND TIME SAVINGS

The machine shreds wood as well as large volumes of green waste. The material does not have to be sorted beforehand. You drive the self-driving shredder to the location where you want to perform the shredding, which means that you don’t lose any time supplying or removing materials.

MINIMUM MANAGEMENT COSTS

The machine was developed from a low-maintenance perspective, so that checks and maintenance don’t become time-consuming and dreaded activities. The Super Prof’s internal management system helps to comply with the schedule. Regular maintenance keeps high repair costs at bay. The blade system is insensitive to foreign objects and its maintenance is simple and self-manageable. Only a limited number of parts are subject to wear and in addition, the machine has a high resale value as a second-hand item, which is an added bonus for its ROI.

MAXIMUM YIELD

The Eliet patented shredding system uses the weakness of the wood and therefore requires little motor capacity. The compact machine with its broad feeder also allows shredding branches of up to 13 cm thick as bundles of voluminous waste. Cutting waste does not have to be sorted prior to shredding. Branches don’t require cutting before processing them in the machine. It all makes for gigantic time-savings.

The ABM system ensures that the engine always operates at maximum capacity and that fuel consumption never exceeds 3 litres per hour. The optional ECOEYE™ system lowers fuel consumption in passive operation mode, yielding another considerable saving. And finally the machine lowers your company’s ecological footprint.

Super Prof MAX Variations

Super Prof MAX Variations

ELIET IS THE FIRST MANUFACTURER IN EUROPE TO EQUIP A SHREDDER WITH A 23 HP VANGUARD EFI ENGINE.

EFI stands for “Electronic Fuel Injection”. With this advanced technology, a small internal microprocessor can determine how much fuel is injected depending upon the load. This ensures that the engine has a much more consistent power curve over a wide range of RPMs. When used on a shredder, this leads to a 25% reduction in fuel consumption and a similar increase in performance. What is unique is that this EFI engine has no choke valve and can start up at any outside temperature with no problems whatsoever. 

Since this Vanguard EFI engine does not have a classic carburettor but works with direct injection, users can avoid the classic carburettor problems such as residue buildup, leaking during transport, clogging, and so on. Above all, the precisely controlled fuel injection permanently ensures an optimal
fuel/air mix which ensures instant combustion at all times. The exhaust fumes are considerably cleaner, which is a step forward for the care of our planet.

Technical Info

Technical Info

Super Prof Cross Country

Engine selection 18 HP B&S Vanguard
Cylinder capacity (cc) 570
Number of cylinders 2
Shreddable timber diameter 130 mm
Engine start system electric
Cooling air cooled
Capacity 6m3 Chips/hour
Shredding technology ELIET Chopping PrincipleTM
Clutch electromagnetic + integrated brake
Feed intake opening 500 x 700 mm / 20 x 28 “
Chopping movements/min. 50.000
Wheel traction 2 hydraulic wheel engines (250 cc)
Number of blades ELIET RESISTTM/8 (24 pc.)
Hydraulic reservoir 13 L
Wheels (Ø x W / material) tracks 180 x 72 x 37 cm
Capacity of the fuel tank 18 L
Cutting width 480 mm
Transmission V-belt XPA 2120 x 2 Powerband
Feed assistance hydraulic diam. 156 mm

DESIGN

Dimensions (L x W x H in mm / inch) 2000 x 835 x 1450 mm / 80 x 83 x 58″
Weight 502 kg / 1109 pounds

OPTIONS

Calibrating sieve option
ECO EYE™ system option
Speed controller for infeed roller option
Agriculture Tires

 

Super Prof On Wheels

Engine selection 18 HP B&S Vanguard
Cylinder capacity (cc) 570
Number of cylinders 2
Shreddable timberdiameter 130 mm
Engine start system electric
Cooling air cooled
Capacity 6m3 chips/hour
Shredding technology ELIET Chopping PrincipleTM
Blades 6 disks, 24 blades ELIET RESISTTM/8
Clutch electromagnetic + brake
Feed intake opening 500 x 700 mm / 20″x28″
Feed height (mm / inch) 1000 mm
Chopping movements/min. 50.000
Chassis steel 3 & 4 mm / epoxy powdercoating
Wheel traction 2 hydraulic engines (100 cc)
Number of blades ELIET RESISTTM/8 (24 pc.)
Discharge height 2000 mm / 80″
Front wheels 4.00 -4 pneumatic tyre
Back wheels 6.00 x 9 pneumatic tyres
Capacity of the fuel tank 18 L
Cutting width 480 mm
Transmission V-belt XPA 2120 x2 Powerband
Feed assistance hydraulic diam. 156 mm
Power control ABM (Anti-Block Motor)

DESIGN

Dimensions (L x W x H in mm / inch) 2000 x 835 x 1450 mm / 80x83x58″ / low gravity point
Noise level Lw(A) 116 dB(A)

OPTIONS

Calibrating sieve option – holes 35 x 35 mm
ECO EYE™ system option
Speed controller for infeed roller option
Agriculture Tires
Lifting hook option

 

Super Prof On Road

Engine selection 18 HP B&S Vanguard
Cylinder capacity (cc) 570
Number of cylinders 2
Shreddable timberdiameter 130 mm
Engine start system electric
Cooling air cooled
Capacity 6m3 chips/hour
Shredding technology ELIET Chopping PrincipleTM
Blades 6 disks, 24 blades ELIET RESISTTM/8
Clutch electromagnetic + brake
Feed intake opening 500 x 700 mm / 20″x28″
Feed height (mm / inch) 1000 mm
Chopping movements/min. 50.000
Chassis steel 3 & 4 mm / epoxy powdercoating
Number of blades ELIET RESISTTM/8 (24 pc.)
Discharge height 2000 mm / 80″
Capacity of the fuel tank 18 L
Cutting width 480 mm
Transmission V-belt XPA 2120 x2 Powerband
Feed assistance hydraulic diam. 156 mm
Power control ABM (Anti-Block Motor)

DESIGN

Dimensions (L x W x H in mm / inch) 3000 x 1500 x 1450 mm / 118x59x57″ / low gravity point
Noise level Lw(A) 116 dB(A)

OPTIONS

Calibrating sieve option – holes 35 x 35 mm
ECO EYE™ system option
Speed controller for infeed roller option
Lifting hook option

 

Super Prof MAX On Wheels

Engine selection 23 HP B&S Vanguard EFI
Cylinder capacity (cc) 627
Power (W/DIN HP) 17,2 (3200)
Number of cylinders 2
Shreddable timberdiameter 130 mm
Engine start system electric
Cooling air cooled
Capacity 6m3 chips/hour
Shredding technology ELIET Chopping PrincipleTM
Blades 6 disks, 24 blades ELIET RESISTTM/10
Feed intake opening 500 x 700 mm / 20″x28″
Feed height (mm / inch) 1000 mm
Chopping movements/min. 50.000
Chassis steel 3 & 4 mm / epoxy powdercoating
Wheel traction 2 hydraulic engines (100 cc)
Number of blades ELIET RESISTTM/10 (24pc.)
Discharge height 2000 mm / 80″
Front wheels 4.00 -4 pneumatic tyre
Back wheels 6.00 x 9 pneumatic tyres
Capacity of the fuel tank 18 L
Cutting width 480 mm
Transmission V-belt XPA 2120 x2 Powerband
Feed assistance hydraulic diam. 156 mm
Power control ABM (Anti-Block Motor)

DESIGN

Dimensions (L x W x H in mm / inch) 2000 x 835 x 1450 mm / 80x83x58″ / low gravity point
Noise level Lw(A) 116 dB(A)
Weight 441 kg

OPTIONS

Calibrating sieve option – holes 35 x 35 mm
ECO EYE™ system inclusif
Speed controller for infeed roller option
Agriculture Tires
Lifting hook option

 

Super Prof MAX Cross Country

Engine selection 23 HP B&S Vanguard EFI
Cylinder capacity (cc) 570
Number of cylinders 2
Shreddable timberdiameter 130 mm
Engine start system electric
Cooling air cooled
Capacity 6m3 Chips/hour
Shredding technology ELIET Chopping PrincipleTM
Blades 6 disks, 24 blades ELIET RESISTTM/10
Clutch electromagnetic + integrated brake
Feed intake opening 500 x 700 mm / 20 x 28 “
Chopping movements/min. 50.000
Wheel traction 2 hydraulic wheel engines (250 cc)
Number of blades ELIET RESISTTM/8 (24 pc.)
Hydraulic reservoir 13 L
Wheels (Ø x W / material) tracks 180 x 72 x 37 cm
Capacity of the fuel tank 18 L
Cutting width 480 mm
Transmission V-belt XPA 2120 x 2 Powerband
Feed assistance hydraulic diam. 156 mm

DESIGN

Dimensions (L x W x H in mm / inch) 2000 x 835 x 1450 mm / 80 x 83 x 58″
Weight 502 kg / 1109 pounds

OPTIONS

Calibrating sieve option
ECO EYE™ system inclusive
Speed controller for infeed roller option
Lifting hook option
Parking brake Super Prof Cross Country option

 

Super Prof MAX On Road

Engine selection 23 HP B&S Vanguard EFI
Cylinder capacity (cc) 570
Number of cylinders 2
Shreddable timberdiameter 130 mm
Engine start system electric
Cooling air cooled
Capacity 6m3 chips/hour
Shredding technology ELIET Chopping PrincipleTM
Blades 6 disks, 24 blades ELIET RESISTTM/10
Clutch electromagnetic + brake
Feed intake opening 500 x 700 mm / 20″x28″
Feed height (mm / inch) 1000 mm
Chopping movements/min. 50.000
Chassis steel 3 & 4 mm / epoxy powdercoating
Number of blades ELIET RESISTTM/8 (24 pc.)
Discharge height 2000 mm / 80″
Capacity of the fuel tank 18 L
Cutting width 480 mm
Transmission V-belt XPA 2120 x2 Powerband
Feed assistance hydraulic diam. 156 mm
Power control ABM (Anti-Block Motor)

DESIGN

Dimensions (L x W x H in mm / inch) 3000 x 1500 x 1450 mm / 118x59x57″ / low gravity point
Noise level Lw(A) 116 dB(A)

OPTIONS

Calibrating sieve option – holes 35 x 35 mm
ECO EYE™ system inclusive
Speed controller for infeed roller option
Lifting hook option

 

Warranty

Warranty

Eliet products come with a 2 year domestic warranty and a 1 year (or 100hours) professional warranty.

Further information can be found here: https://www.elietmachines.com/en/pages/warranty-conditions.html

Delivery

Delivery

Ride on Mower and Larger items over 80kg Delivery

This machine will be delivered using our own transport and our own member staff to make sure you receive all the information and instruction you require.

The product will be fully assembled in our own workshops by our trained technicians and be ready to use when we deliver. We will have also recycled all of the packaging and waste on your behalf to save you the trouble.

Once you place your order we will contact you asap to advise on delivery. From point of order, delivery will usually happen within a week, during busy periods sometime these timescales will increase. We will contact you if any delays occur.

*Only Available for Delivery within these postcodes –
EX – 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 31, 32, 33, 34, 35, 36, 37, 38, 39.
TA – 1, 2, 3, 4, 5, 6, 21, 22, 23, 24.
PL – 15, 16, 17, 18, 19, 20, 32,35.
TQ – 11, 12, 13,14.

If you live outside of these areas, please do not hesitate to contact us to discuss your options.

My Shopping Basket

Close

No products in the cart.

Shopping Now

Login & Signup